ActiveEdge offers simple and precise wireless adjustment, allowing micron accurate diameter changes at the push of a button.

Entering a compensation amount into the ActiveEdge Remote Control initiates an adjustment of up to seven ActiveEdge cartridges on a single tool, using wireless transmission.

ActiveEdge enables machine operators to meet critical tolerances without removing the tool from the machining envelope, reducing spindle downtime, meeting precise tolerance requirements and improving operator safety.

ActiveEdge tooling can be integrated with in-process gauging to produce micron accurate bores as part of a totally automated solution.

Rigibore's Zenith
ActiveEdge bar

To order, please send us an enquiry or call +44 (0) 1736 755355 for more information.

Remote Adjustment Process

Enter tool's unique ID number and adjustment amount in microns into the Remote Control.
Adjustment data transfer occurs through wireless radio transmission.
ActiveEdge cartridge(s) adjust to the required diameter.

Benefits of ActiveEdge Technology & Wireless Adjustment

Micron Accuracy
Calibrated position sensing of the cutting edge ensures perfect tool sizing.
Reduced Cycle Time
Micron accurate adjustments can be made without having to stop the manufacturing process.
Health and Safety Benefits
Tool adjustments are made without the operator entering the machine.
Simplicity In Adjustment
Precise tolerances can be achieved by operators of all skill and experience levels.

ActiveEdge Cartridges

The ActiveEdge Remote Control transmits a compensation request via wireless signal to the ActiveEdge cartridge. This precision cartridge is able to adjust accurate to 1 micron down to 0.6mm on diameter.

The adjustment mechanism is built into each cartridge, this means Rigibore can design and manufacture up to seven cartridges on a single ActiveEdge tool, each of these can be independently adjusted using the Remote Control.

ActiveEdge Cartridges

ActiveEdge Remote Control Features & Functions

Compensate Tools
Tools can be adjusted by simply entering the tool ID and compensation amount into the wireless Remote Control handset.
Tool Check
Check the tool status to confirm the battery level and available adjustment range.
Shut Down Tools
Completely switching off the tool when not in use will extend the 2-3 month battery life.
Cartridge Calibration
The integral SD card contains cartridge calibration data for all cartridges. Uploading the correct calibration information to the tool can be done directly from the handset.
Tool Usage Information
Access the tool memory to provide lifetime usage data.
Activity Log
The SD card contains an activity log that records all operations performed with the handset.


  • What is the adjustment range?

    0.3mm on radius - but we build the tools so that at nominal they are at 1/3 of their way through the adjustment range. This gives 0.2mm of positive movement on radius allowing for wear compensation.

  • What style of inserts are used?

    All our products take ISO standard inserts. ActiveEdge cartridges support TC..11 and CC..06 inserts.

  • How long do the batteries last?

    In normal use between two and three months, it depends how often you adjust the tool. A battery replacement guide can be found below.

  • How can I switch off the tool/save battery life?

    When a tool is not in active use, it should be switched off completely to save power and extend the battery life. The 'switch off' button (found in ActiveNet) sends a request to the interface to shut down the tool. The tool can be turned on again by pressing the pressure switch on the upper face of the yoke.

  • How accurate is the adjustment?

    The cartridge is calibrated to a tenth of a micron, this means that we can guarantee micron accuracy in compensation.

  • Is it affected by coolant?

    The system is designed and tested for use in high pressure coolant. The tool is rated IP68 and pressure tested twice during manufacture.

ActiveEdge is available now to suit your application, please send us an enquiry or call +44 (0) 1736 755355 to order.

ActiveEdge Demo

ActiveEdge Technical Documents

Description Last Updated Link
Cartridge Maintenance and Replacement
Cartridge calibration file library 22/09/2017 Download
Cartridge maintenance instructions 18/12/2015 Download
Cartridge replacement procedure 09/05/2017 Download
Tool Maintenance
Recommended lubricant information 06/09/2013 Download
Battery replacement procedure 09/07/2013 Download
Safe procedure for storing used batteries 18/07/2014 Download
AEI Installation Procedures
Siemens 840D 11/07/2016 Download
ActiveEdge Remote Control user guide 28/06/2017 Download
ActiveNet user guide 23/08/2010 Download
CNC macro descriptions 01/02/2016 Download
CNC macro status codes and recovery procedures 30/08/2013 Download
SPC macro description (Siemens) 30/11/2016 Download
SPC macro description (Fanuc) 23/08/2017 Download
Downloadable Software
ActiveNet PC software 24/03/2017 Download

ActiveEdge Tool Breakdown

Hover over a point on the image to reveal information.
Rigibore ActiveEdge component diagram, hover over sections to reveal details

The tool can be made with any taper, spindle connection or adapter to suit the customer's machine requirements.

The tool is a custom-built special, designed using Rigibore's RADS software, and can be supplied in 3-4 weeks. Tools are engineered for the specific application, and typically balanced to G2.5 to ensure accuracy and rigidity in cut. Chamfer tools, semi-finishing cartridges and up to 4 finish bores can be completed with one tool.

The Yoke contains the batteries and radio hardware that allow the tool to be adjusted remotely. With ActiveEdge there is no required modification to the spindle or machine, this means that the tool can be adjusted in the carousel, at the presetter or if required, in the spindle.

Sealed with an 'O' ring the tool yoke is protected against coolant ingress.

The two 6v batteries power the radio communication and actuation of the mechanism in the cartridge.

Batteries last around 2-3 months of standard use in a production environment. System warnings are given when they need changing.

This user replaceable cartridge contains the drive mechanism, calibrated measurement device and adjusting slide, with the capability to move the cutting edge 1 micron on diameter.

ActiveEdge Cartridges supports Standard ISO Inserts CC..06, TC..11 and CP04 Inserts.

Upto 4 cartridges can be individually adjusted on one tool assembly.

The cartridge is capable of supporting through coolant up to 80 bar. Coolant is supplied through the cartridge directly to the cutting edge of the insert.

The pretensioned slide mechanism has no measurable backlash. This is the only radial moving part of the assembly so adjustment has no negative impact on the tools balance.

The maintenance of the cartridge is limited to regularly flushing the mechanism with grease through a supplied grease gun. This prevents contamination and ensures perfect results from the accurate internal mechanism.

Other Companies in the Bassett Group